Typically not. AP-M and MP-S Series intercoms had a higher maximum volume for applications like drive-thrus and paging. Our current line of analog intercoms do not provide the same degree of volume. The recommended upgrade path is our IX | IXG Series. You can reach out to your local Aiphone sales representative for more assistance.

Typically not for answering stations. LEF and LEM answering stations will not have enough capacity to replace an existing NEM answering station, since it will not have another channel and will lack other key features. The recommended upgrade path is our IX | IXG Series. You can reach out to your local Aiphone sales representative for more assistance.

LE Series substations or door stations like the LE-SS/A or LE-DA can replace existing substations. This requires a PC-359B latching board.

There are some replacement parts available for the VC Series. The VC-K tenant station is still manufactured and can be ordered through an Aiphone distributor.

Replacement buttons for the VC-M entrance stations are also available. Each is made up of three parts:

VC-M Button Module (Spare Part #217080)

VC Card Cover (Spare Part #258620)

VC Name Card (Spare Part #258630)

These spare parts can be ordered through distribution or directly from Aiphone Customer Service. Call 1-800-692-0200 for more details.

If new wiring cannot be run, an audio-only GT Series system can usually work on the existing wire. Reach out to your local Aiphone Sales Representative for more information. https://www.aiphone.com/sales/regional-sales

The existing wiring will support a new IE Series intercom, which will offer a similar form factor and operation.