Separate Transmit and Receive Volume Controls on LEF Series Master Station

You are here:
Estimated reading time: < 1 min

Modification

Separate transmit and receive volume controls

 

Difficulty Level

5 – Hard – circuit creation and internal addition.

 

Components Required

  1. Potentiometer: 10K Ω
  2. Resistor: 5.6K Ω

Instructions

  1. Install potentiometer and resistor as shown on schematic.
  2. Cut trace as shown on schematic.
  3. Potentiometer will lower outgoing volume. Main volume control on the master will control the overall volume in both directions.

Add components as shown above. Cut trace where marked with an X. Potentiometer will lower outgoing volume. Main volume control on the master station will control the overall volume in both directions.
Was this article helpful?
Dislike 0
Views: 175